Cut a 12" mirror tile in half to yield two 12" X 6" inch mirrors. The mirrors may be pasted on plywood for backing. Cut
two triangular pieces of wood (3/8" to 3/4" plywood or solid wood - 1/2" is best) 6" on two sides and 5" on one side. To
set the angle between the mirrors place the wood triangles at each of the ends of the mirror. This gives about 500
between the mirrors (See diagram). Using duct tape, attach the mirrors along the 6" sides of the triangles. Our experience
shows that this offers the best angle for viewing. All other measurements may differ to accommodate different mirror sizes.
Vitrectomirror ™ - Mirror Viewing for Post Macular Eye Surgery